شیلد دیتا لاگر آردوینو – Data Logging Arduino Shield
شیلد دیتا لاگر آردوینو قابلیت اتصال کارت حافظه SD (SD Card Memory) با برد آردوینو را فراهم میکند و با بردهای آردوینو UNO و برد آردوینو مگا سازگار است.
کارت حافظه از طریق کانکتور SD Card با استفاده از SPI با برد آردوینو تبادل داده میکند. از یک تراشه انتقال سطح (Level Shifter) برای تطبیق سطح ولتاژ کارت حافظه و پایههای برد آردوینو استفاده شده است.
از دو فرمت فایل FAT16 و FAT32 کارت حافظه پشتیبانی میکند.
شیلد دیتا لاگر آردوینو دارای یک تراشه Real-Time Clock (RTC) به نام DS1307 است. برای انجام عملکرد درست این تراشه هنگامی که تغذیه وجود ندارد، یک کانکتور باتری برای قرارگرفتن باتری سکهای 3 ولت روی برد قرار دارد.
تراشه DS1307 ازطریق I2C با برد آردوینو ارتباط برقرار میکند.
یکی دیگر از قابلیتهای وجود این برد تعداد زیادی پدهای سوراخدار (THT Pads) برای ساخت مدارهای نمونه است.
هدرهای نری زیر برد و هدرهای مادگی روی برد قابلیت اتصال شیلد از زیر و روی آن را به وجود میآورند.
تغذیه ورودی شیلد دیتالاگر آردوینو 5 ولت است. یک رگولاتور ولتاژ 3.3 ولت روی برد قرار دارد و تغذیه 3.3 ولت برای مدارها و کارت حافظه SD را تامین میکند.
یک دکمه ریست، یک LED تغذیه و دو LED با کاربرد عمومی از دیگر قطعات روی این شیلد هستند.
کارت حافظه از طریق کانکتور SD Card با استفاده از SPI با برد آردوینو تبادل داده میکند. از یک تراشه انتقال سطح (Level Shifter) برای تطبیق سطح ولتاژ کارت حافظه و پایههای برد آردوینو استفاده شده است.
از دو فرمت فایل FAT16 و FAT32 کارت حافظه پشتیبانی میکند.
شیلد دیتا لاگر آردوینو دارای یک تراشه Real-Time Clock (RTC) به نام DS1307 است. برای انجام عملکرد درست این تراشه هنگامی که تغذیه وجود ندارد، یک کانکتور باتری برای قرارگرفتن باتری سکهای 3 ولت روی برد قرار دارد.
تراشه DS1307 ازطریق I2C با برد آردوینو ارتباط برقرار میکند.
یکی دیگر از قابلیتهای وجود این برد تعداد زیادی پدهای سوراخدار (THT Pads) برای ساخت مدارهای نمونه است.
هدرهای نری زیر برد و هدرهای مادگی روی برد قابلیت اتصال شیلد از زیر و روی آن را به وجود میآورند.
تغذیه ورودی شیلد دیتالاگر آردوینو 5 ولت است. یک رگولاتور ولتاژ 3.3 ولت روی برد قرار دارد و تغذیه 3.3 ولت برای مدارها و کارت حافظه SD را تامین میکند.
یک دکمه ریست، یک LED تغذیه و دو LED با کاربرد عمومی از دیگر قطعات روی این شیلد هستند.
DATA LOGGING SHIELD V1.0
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents possible damage to your SD card.
Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for 2 years.
Included libraries and example code for both SD and RTC mean you can get going quickly.
Prototyping area for soldering connectors, circuitry or sensors.
Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported
A shield with an RTC and SD card holder/reader (SD card is connected directly to the Arduino via the shield). This allows you to easily log data with time stamps and put it on an SD card. There is a 3.3V level converter on the shield so you can easily use it with a 5V Arduino.
Specifications:
Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for 2 years.
Included libraries and example code for both SD and RTC mean you can get going quickly.
Prototyping area for soldering connectors, circuitry or sensors.
Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported
A shield with an RTC and SD card holder/reader (SD card is connected directly to the Arduino via the shield). This allows you to easily log data with time stamps and put it on an SD card. There is a 3.3V level converter on the shield so you can easily use it with a 5V Arduino.
Specifications:
- Supply voltage: 5V DC
- Signal voltage: 5V
- RTC:
- Chip: DS1307
- Communication: I2C
- Battery: CR1220
- SD card adapter:
- Suitable SD card format: Standard
- Built-in level converter: Yes
- Shield for: Uno, Leonardo and Mega*
Pinout:
- DS1307: A4 (SDA), A5 (SCL)
- SD card: 10(CS), 11(MOSI/DI), 12(MISO/DO), 13(CLK)
This is an Arduino compatible data logging shield with an SD card slot and a real-time clock (RTC). The RTC will keep track of time even when the Arduino is unplugged – the battery will last several years. This shield’s onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
تا این لحظه نظری در مورد این محصول ارسال نشده است.